U301 Automatic Nozzle

U301 Automatic Nozzle

U301 series automatic nozzles are designed with today's customer in mind. Small, trim, light weight, easy and convenient to operate, the is a rugged performer that offers long life and reliable service.

Materials:

Body: Aluminum

seals: Buna-N

Main stem seals: Viton Cased Oil Seal / Graphite with Teflon

Main stem: Stainless steel

Color of insulator :

Red Green Blue Yellow Black

Features :

U301-B/D/F Flow rate: 0-60 L/m (15/16")

U301-A/C/E Flow rate: 0-45 L/m (13/16")

Working Pressure: 0.18Mpa

U301 Automatic Nozzles-for diesel, kerosene and all kinds of gasonline service.

Easily replaced spout- simply remove the screw.

Spout kits are available from HONGYANG.

Low profile aluminum body- light weight, easier to handle, provides an attractive, image enhancing appearance.

Hold-open rack is available for full service applications.

The one hand control means easy setting to flow rate for customer's convenience.

Full hand insulator- protects both nozzle and vehicle, and insulates users' hands.

Selective splash guard.

100% Factory Tested.

Available Colors- color chart on inside back cover

Replacement Parts:

Key Description

1 Spout 13/16''

2 Spout 15/16''

3 Full hand insulator

4 Lever

5 Lever assembly

6 Diaphragm assembly

7 Main valve assembly

Package:

Net Weight Cross Weight Dimension

18.75kg/case of 15

12.25kg/case of 10 22kg/case of 15

15kg/case of 10 55x34x42.5cm/case of 15

37.5x34x43cm/case of 10

Important:

The products should be used in compliance with applicable country, province and local Laws and regulations. Products selection should be based on physical Specifications and limitations and compatibility with the environmentand materials to be handled. HONGYANG makes no warranty of fitness for a particular use. All illustrations and Specifications in this literature are based on the latest products information available at the time of publication,HONGYANG reserves the right to make changes at any time in price, materials. Specifications and models and to discontinue models without notice or obligation.

haft. The spring between top cover and distributing valve is used for enforcing sealability. The two gears synchronous to crankshaft moving transmit rotation number into pulse sensor. Working principle This type measurement transducer is similar to a set of hydraulic motor, which is driven by pressured oil. Thus, the discharge is corresponded to the crankshaft rotation. As distributing valve’s position is certain when oil flowing into measurement transducer, the piston discharge or inflow also is constant. Pistons depend upon the different oil pressur fuel dispenser e of inflow and discharge to move, which form a shuttle movement. The above two pistons movements create a third cylinder, which also has a 120 degree angle. The dynamic working circulation is showed in Diagram 2-25. As the diameter and moving distance of piston is certain, the relation between movement and crankshaft rotation also fixed. In every two times inflow or discharge of piston, crankshaft turn around a circle, oil volume in inlet or outlet progress is constant. 1-Piston 2-Crankshaft 3-4-Connecting rod 5-Screw 6-Bearing 7-Bushing 8-Frame 9-Distributing valve 10-Top cover 11-Bearing 12-Spring 13-14-Gear 15-Adjusting bolt 16-T-shaped key 17-Sider cover Diagram 2-24: Structural drawing of four-piston measurement transducer Diagram 2-25: Working principal drawing This type of measurement transducer includes 1L circulation discharge and 0.5 L circulation discharge，selecting according to wanted discharge of fuel dispenser. Discharge adjustment Over a long period of operation fuel dispenser the accuracy of measurement transducer declined due to either parts abrasion or large change in oil temperature and viscosity. Therefore, regulative device often used to adjust the accuracy within the stipulated scope of national metrology appraisal. The following procedure is conducted as measurement accuracy decline. (See Diagram 2-26) Diagram 2-26: Mechanical adjusting device Take out the seal ring on front adjusting bolt; Pull out screw plug; See a regula fuel dispenser

Command　　 Terminate　　 3　　 Command　　 CUSTOMER INFO　　 PROCESSING　　 Customer Dialogue　　 Completed　　 Entry Allocation　　 1　　 1 1　　 fuel dispenser WAIT　　 WAIT　　 WAIT DATA　　 TXN　　 TXN DATA　　 TXN DATA　　 Process Command　　 CHS MT　　 Not Valid　　 2 ==　　 2 2　　 Terminate　　 PROCESS OPEN　　 PROCESS　　 fuel dispenser PROCESS Command　　 TXN DATA　　 TXN DATA　　 TXN DATA　　 TRANSACTION　　 Time-Out Processing Completed fuel dispenser

lanning law is crazy,�he says. And the local priest, Father John Glynn, goes much further “I ll be up there at the site if they evict the travellers. And my poster will say ‘This is ethnic cleansing.’�Time will tell how many rally to that banner. © 2006 . Bagehot Caught in the middle Apr 6th 2006 From The Economist print edition Being a minister is hard enough without having to serve two masters NOBODY will be more relieved than John Hutton if the chancellor s apparent change of heart in favour of th fuel dispenser e recommendations made by Lord Turner in the final report of the Pensions Commission proves to be sincere (see article). That would bring Gordon Brown s views into closer alignment with those of the prime minister, thus saving both Mr Hutton s sanity and, quite possibly, his career. Mr Hutton is the secretary for work and pensions, and his predicament is an extreme version of one faced by almost every other ambitious government minister. They find themselves trapped between doing the things Tony Blair requires of them in order to establish his legacy and provoking the anger of Gordon Brown if they set policy too firmly on a course he disapproves of. Mr Hutton is a fervent Blairite who shares the prime minister s insatiable enthusiasm for “reform� Perhaps more than anyone, Mr Hutton, who served at the Department of Health for seven years under three secretaries of state, has been responsible for implementing Mr Blair s vision for the NHS. When the prime minister asked Mr Hutton fuel dispenser to go to the Department for Work and Pensions last year, there was no doubting his intent. From 1997 until 2004, the department had operated as a Treasury fief, run by a succession of ministers whose primary political loyalty was to Gordon Brown. Mr Blair had come to believe that two objectives he had set himself before leaving Downing Street—toughening incapacity-benefit rules and achieving a lasting settlement for pensions—could not be realised wh fuel dispenser