U101-B Flowmeter

U101-B Flowmeter

This type of meter is used to fuel dispensers for measurement of pressurized oil.

Materials:

Body: Cast Iron (Spray-Painted)

seals: Buna-N

Technical Specifications:

Discharge rate of each revolution: 0.5L

Rotary direction of rotary bar: Clock wise

Environmental condition:-40~~+70degree

Minimum adjusting increasing quantity: 0.05%

Working pressure: 0.12Mpa-0.3Mpa

Repeat error: not exceed ±0.1%

Features :

Micro-accurate 4-piston,positive displacement type meter with rotary valve, exterior adjustment and double oil lip seal for long life.

External structure achieved by single body design of components.

Excellent accuracy: ±0.2% with high flow through-put

100% tested before Ex-Factory

Package:

Product ID Net Weight Cross Weight Dimension

U101-B 5.3kg/case of 1 5.5kg/case of 1 27x23x22cm/case of 1

ents on metrological management. The chapter briefly introduces fuel dispenser’s metrological management and technical requirements, appraisal related and attentions. Article I Metrological management and technical requirements In accordance with The Law on Metrology of fuel dispenser’s legal management mainly includes following aspects: Model approval, initial approval, subsequent appraisal and inspection in operation. Model approval refers to an entire test, examination and assessment as to new model’s entire performance. Initial approval refers to assess whether or not the fuel dispenser made by manufacturer in accordance with the model having been ratification through a series of testing, as well as metrological performance with relative metrological rules and regulations. Initial approval really has two phases �?- approval combined with factory test, and testing appraisal after installation. Subsequent appraisal is conducted after long time since initial appraisal, from which considerable appraisal period is set down according to related requirements. Periodical appraisal is also regarded as the continued subsequent appraisal. Fuel dispenser’s measuring performance within appraisal period needs to be examined, so filling station should deploy self-check standard instrument (no less than 20L) to examine and inspect. Apart from applied to fuel dispenser approval, JJG443-98 also adapt sample testing and pattern evaluation. Although there are two items of acc fuel dispenser uracy and flow distance ratio conducted in initial approval and subsequent evaluation, there are other technical parameters different from approval as for fuel dispenser made after passing pattern evaluation, including minimum calcu fuel dispenser lated volume and minimum cubic variable. Several items refer fuel dispenser ence to the pattern evaluation and sampling testing of mechanical hydraulic section of fuel dispenser as followed: Accuracy testing The testing’s purpose is to define the flow curve and verify the tolerance scope in which the allowed maximum tol

BCD digits per byte　　 x　　n 2x-1 �?MSD header　　 �?Flush right　　 x = number of bytes; MSB　　x hexadecimal bytes Oh x Binary bytes 2　　 x　　 header　　 8x can be upper bound for　　b 8x Oh x Bit 3　　 the number of bits (for b4 x　　 x=1); bits flush right　　 �?Coded in ASCII　　ns as an ans anc Cx Alphanumeric 4　　 �?Centred on the right so　　anp x an fuel dispenser dor special x　　 need　　 characters　　 fuel dispenser �?Character space head fuel dispenser er　　 Coded in ASCII　　hhmmss H Time 5　　

e worst of all things—an ineffective occupier.�? Simon & Schuster; 417 pages; $27 and £18.99 Upstanding and devout, this former American ambassador to the Netherlands seemed horribly out of place at times. He took up the job in Buy it at May 2003, having been appointed at short notice after looters had Amazon.com despoiled Baghdad and a retired US Army general, Jay Garner, had proved Amazon.co.uk he could not cope. Mr Bremer had little prior experience of failed states, peacekeeping or Arabs, and he struggled to comprehend a people whose first concern, once granted their freedom, was not the public good. His determinedly fixed grin is painful to imagine as he describes a crafty Shia imam as “a Jesuit priest masquerading as an elf.�? Worse, he will be remembered for two calamitous orders which he issued within days of arriving in Baghdad. The first banned some 35,000 members of Saddam Hussein s Baath party, including doctors and university professors, from government jobs; the second disbanded Iraq s army. Looking back, this last was an idiotic act, for it created both a security vacuum and insurgents to fill it. Mr Bremer tries in vain to justify the decision. He argues that the Iraqi army had already scattered long before the Americans advanced. Yet, months later, senior American command fuel dispenser ers were still debating whether to recall it. He argues also that the Kurds would never have accepted the army being recalled; yet they could not have prevented it. Finally he suggests, more reasonably, that the decision was made fuel dispenser for him by others. It was the brainwave of Douglas Feith fuel dispenser , under-secretary of defence for policy, supported by both Mr Rumsfeld and his deputy, Paul Wolfowitz. That these individuals subsequently tried to blame Mr Bremer for the debacle was calumnious, but it does not let him off the hook. It remains uncle