S-GA4 FUEL DISPENSER

S-GA4 FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type :Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display:Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose: 4.5m

Weight : 305kg.

Dimension(L×W×H) : 1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 27

erance not exceed ±0.3%，repeated measuring no more than 0.15% as fuel dispenser is fuel dispenser operated within the flow range between maximum flow-rate (Qmax) and minimum flow-rate (Qmin). Flux scope is also called measurable range --- between minimum measured value and maxim fuel dispenser um flow-rate within basic tolerance. The ratio of maximum flow rate to mini fuel dispenser mum flow rate is called measurable ratio. In model testing the value is 10 to 1. Accuracy testing is conducted at six flow points within the measurable range so as to get their tolerances. This relation between tolerance and flux is called the tolerance nature of flow meter. The less flow tolerance the better. Measurable range ratio is 10 to 1 as fuel dispenser being left factory, testing three flux points, that is, Qmax, 0.4 Qmax, 0.1 Qmax . However, the ratio in operation place is 5 to 1, only testing two flow points -- Qmax , 0.2 Qmax . Minimum measured volume testing Testing purpose is to assess indicative tolerance when refueling by minimum measured value. Relevant regulations stipulate that the minimum flow rate don’t surplus 5L as for a fuel dispenser with maximum flow rate no more than 60L. Its maximum tolerance in terms of minimum measured value don’t exceed ±0.5%, measurable repeatability no more than ±0.25%. Flow stoppage testing The testing is conducted in order to define the possible tolerance range that generated in refueling progress in which hydraulic flow stop suddenly due to some accidents like power cut. Vapor separator performance testing It is conducted to value the capacity of vapor separator how much vapor would be divided from oil. Vapor separator’s function is to ensure that media passing over flow meter should be in single direction without any foam or bubble. Otherwise, flow meter can’t get right value of measurement. Volume fluctuation testing The test is aimed at defining the hose’s inner cubage variability of fuel dispenser under maximum pressure condition. According to fuel dispenser’s working principal, hose always

Im fuel dispenser prim le 210203 13:02 1361　　All right reserved 铮　　 fuel dispenser Ref : NT1118R1　　 fuel dispenser MPA V5.2: SPECIFICATIONS TECHNIQUES　　 Nb Pages : 1 + 0 PJ　　 de la LIAISON AUTOMATE-MONETIQUE　　 Date :　　POS Department　　 Description SM DAC Remarques　　BF7 GESTION DES REMISES DES TRANSACTIONS DE PAIEMENT　　MF Gestion des remises des transactions de paiement　　16.1.1 Emettre la remise des transactions d une application X　　16.1.3 Prendre en compte la consolidation de remise du syt ╩e acqu reur X　　16.1.4 Supprimer une remise consolid e X　　19.6.1 Editer un comte rendu de remise de transactions X　　16.1.5 R initialiser ?un le num ro s quentiel de transaction X　　BF8 SERVICES COMPLEMENTAIRES ACCEPTEUR　　MF Services compl mentaires accepteur d dition et de consultation　　19.5.2 Editer les param ╰res de r f rence d une application X　　19.5.3 Editer les param ╰res de fonctionnement d une application X　　19.5.4 Editer les caract ristiques mat rielles et logicielles d un syst ╩e d a

pace in almost 16 years. The money supply grew by 0.8% in August after expanding fuel dispenser by 1% in July. In Japan department-store sales in August were 0.9% lower than a year earlier. This was the fifth such monthly drop in a row. Clothing sales fell by 1.7% and sales fuel dispenser of household products dropped by 3.2%, but food sales rose by 0.7%. fuel dispenser © 2006 .  About sponsorship Output, demand and jobs Sep 21st 2006 From The Economist print edition © 2006 .  About sponsorship Prices and wages Sep 21st 2006 From The Economist print edition © 2006 .  About sponsorship Output gaps Sep 21st 2006 From The Economist print edition The output gap is the difference between an economy s actual and potential GDP. Measuring potential GDP—which is the output consistent with full employment and stable inflation—is part science, part guesswork. Countries with positive output gaps produce beyond their potential and tend to have accelerating inflation. This year Ireland is the only country in the euro area with a positive output gap, according to the OECD. © 2006 .  About sponsorship Money and interest rates Sep 21st 2006 From The Economist print edition © 2006 .  About sponsorship The Economist commodity price index Sep 21st 2006 From The Economist print edition © 2006 .  About sponsorship Stockmarkets Sep 21st 2006 From The Economist print edition © 2006 .  About sponsorship Trade, exch