S-G2 FUEL DISPENSER

S-G2 FUEL DISPENSER

Pump Type:Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter):Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight : 247kg.

Dimension(L×W×H): 1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 27

ispenser is operated simply, putting down nozzle to start system, and n fuel dispenser ozzle automatically closed when tank is full. Other operation can be conducted on the operating keyboard, such as presetting, starting, close, inquiry and various denotations. Main components and functions Main components A fuel dispenser composed of pump, oil-air separator, flow meter (measurement transducer and counter display part), nozzle, electric system (control, fuel dispenser transmission, operation, and display system), electric section, pipeline, oil indicator, bracket, covering, etc. Need to special explanation that fuel dispenser is a kind of delivery equipment used in flammable and combustible circumstance, thus, the electric and electrical components and their connection should be manufactured and certificated in conformance with the national explosion-proof standards so as to ensure the product security. In addition, China had stipulated that from February, 1990 that the commercial fuel dispenser should have the function of tax-supervision, in accordance with the national taxation requirement so as to safeguard the reliability and security of taxation data. The key components and main principle of fuel dispenser as followed: 1-Motor 2-Pump 3-Vappor separator 4-Measurement transducer 5-Sensor 6-Mechanicle/electronic counter device 7-Oil indicator 8-Nozzle Diagram 1- 20: Major components and working flow of fuel dispenser 2.2 Main components functions When the fuel dispenser’s starting component work (e.g. take off nozzle or push starting button) motor is operated and drive pump. The oil is sucked into pump chamber from underground tank, being be pressured in pump body, and flow into oil-air separator in where air was segregated from oil. The air-free oil flow into measurement transducer and impel the calculating piston move, the position movement of output axis sign corresponding to fuel filled was transmitted and converted into electric pulse sign through sensor. The pulse sign transmit to electrical counter device that r fuel dispenser

he CD sends the unsolicited data Status.　　 MAJOR ERROR fuel dispenser If a major error event occurs the CD moves into the INOPERATIVE state.　　 Action: The CD sends the unsolicited data Status and Error_Type_Message.　　 MINOR ERROR If a minor error event occurs the CD terminates its current operation and stays in the IDLE　　 state.　　 fuel dispenser Action: The CD sends the unsolicited data Error_Type_Message.　　 In case a command is sent which is not included in this event description the command will　　 (OTHER)　　 be rejected and the CD stays in the same state.　　 Action: The CD sends a NAK - Command refused in this state .　　2.2.3 State IDLE 3　　 STATE DESCRIPTION　　January 2005 IFSF - STANDARD FORECOURT PROTOCOL Version 2.01　　 CONTROLLER DEVICE APPLICATION　　Page: 10　　 In this state the CD is waiting for a request or is processing a request. This is the normal　　 IDLE　　 state in which the CD should be in most of the time.　　 EVENT DESCRIPTION　　 Closed When the Closed command is received the CD moves into the CLOSED state.　　 Action: The CD sends the unsolicited data Status.　　 MAJOR ERROR If a major error event occurs the CD moves into the INOPERATIVE state.　　 Action: The CD sends the unsolicited data Status and Error_Type_Message.　　 MINOR ERROR If a minor error event occurs the CD terminates its current operation and stays in the IDLE〠fuel dispenser

hey are doing their best to ensure that they never have to turn to the fuel dispenser IMF again, by building up enormous foreign-exchange reserves, a hugely expensive and inefficient use of their resources (see article). Most financial bigwigs think the fund s future lies in helping to sort out the big global imbalances. Mr King wants the IMF to follow Keynes s dictum and offer “ruthless truth-telling�when countries are going wrong. Endless proposals o fuel dispenser ffer advice on improving “multilateral surveillance�and on making the IMF s board more independent. Sadly, the fund s ability to tell rich countries what to do is extremely limited. Rich countries have not borrowed from the IMF in decades and will be deaf to the fund s wise words unless it suits their own domestic interests. Only if the fund had the ability to punish non-borrowing members (as, in theory, it did in 1944), would the focus on “surveillance�amount to much. But no rich country will give the IMF that power. It is naive to believe the fund can become a global financial guardian. The IMF s future—rather like its recent past—lies with emerging markets, where access to international capital is more precarious than you might think. Should global financial conditions become less forgiving, many countries—whether Indonesia, Hungary or even Brazil—might once again need access to the IMF s cash. Even the strongest would be better pooling risks within the IMF than going it alone by building up huge independent reserves. For that to happen, emerging economies must believe the IMF represents them. This calls for a shift of power away from Europe. It is absurd that Brazil, China and India have 20% less clout within the fund than the Netherlands, Belgium and Italy, although the emerging economies are four times the size of the European ones, once you adjust for currency differences. Emerging countries are keen to contribute more cash (and thus get more votes), and they have the support of Rodrigo de Rato, the IMF s Spanish boss. T fuel dispenser