D-GC88Q FUEL DISPENSER

D-GC88Q FUEL DISPENSER

FlowMeter Type : Optional

Accuracy :±0.2%

Pressure Loss (kg/cm) :Under 0.25

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp): 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition:-40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight : 450kg

Dimension(L×W×H) : 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 26

. Oil in separating chamber fail to flow into low pressure chamber because return valve is jammed due to big floater split and much waste in return valve. Many operations without refueling lead to overflow in exhausting pipe. Fuel without data count Pin installed on fuel dispenser the elbow of measurement transducer has broken. Replace new elbow or pin. It has some wrong in count pulse of transducer though axis is still rotated. Inspect wiring of double opticaleletric pulse, main board and chipset. Confirm that whether trouble of short circuit on wiring board. 11. Although fuel dispenser normally discharge display screen don’t show data. Failure in PPU change Using multimeter examines parameter lock whether open or closed. Computer of fuel dispenser is on power, but can’t start operation. F fuel dispenser irstly inspect keyboard lock’s state, capacitor on wiring board. Measure voltage of power supply (�V, �2 V). Examine switch signal, change when necessary. Inspect boot-strap signal，replace new main board as signal break. Examine power supply wiring if motor stop rotation with signal. Abnormal stop in operation fuel dispenser Inspect voltage of power supply (�V, �2 V), change the one that low voltage. Lead connection is not fixed. Tight bolt fixing lead. Wire voltage of motor is unstable. Display screen trouble Change display screen with new one. If still don’t displays replace main board of fuel dispenser Keyboard trouble Replace with a new keyboard, if could work there is wrong in previous keyboard. If still don’t work with a new keyboard, trouble would be in mainboard. Computer doesn’t work on power Inspect voltage of power supply (�V, �2 V),replacing broken one. Examine SW signal; if failure replacing optical board. If SW signal is in normal state, replace main board. Date jump in display screen as hold up or put down nozzle One of reason is leakage on pipeline and bottom valve. Randomly prolong or replace non-standard pipe and hose also make this trouble on fuel dispen

write the recipient address table　　- add one recipient address in the table　　- remove one recipient address from the table.　　Add_Recipient_Addr and Remove_Recipient_Addr are the only Write Messages that can be　　used by devices to update the table safely.　　Devic fuel dispenser es should only add themselves logical devices they are physically hosting.　　Implementation Guideline　　To enable a site controller to configure the recipient address tables of each node on the　　network it must know both the logical and physical addresses of each node. This can only be　　done when a heartbeat message has been transmitted from a node since it is only then that the　　site controller receives the physical address.　　For example consider the case of a site controller (PNA 21 LNA 21) that wants to configur fuel dispenser e　　a dispenser (PNA 11 LNA 11) to send its unsolicited messages to a tank gauge (PNA 91　　LNA 91). It cannot do this unless it knows the physical node address of the tank gauge since　　the Write Recipient Address Table command only contains a logical address field. Once a　　heartbeat command has been receive fuel dispenser d from the tank gauge then its physical address can be　　obtained and added to a Physical Address Table within the site controller.　　Note also that each subnetnode address must be unique within an IFSFLON network.　　FP2_1.84 IFSF STANDARD FORECOURT PROTOCOL February 2003　　 COMMUNICATION SPECIFICATION　　Page: 32　　4.5.2.1 Read Recipient Address Table　　 Message provided Request message on Answer message on Answer received by　　 by the application the Network the Network the originator　　 application　　 LNAR LNAR LNAO　　 LNAO LNAR LNAR　　 IFSF_MC = 2 IF

s slowly by, its windows bending the reflections of a street full of Iraqi faces. “The bridges...the water� the child s Arabic continues, as a bright goldfish floats across the surface, an aquarium captured through a shop window. The scene was shot a few months before fuel dispenser the war began, and the youthful narrator, reminiscing two years later, may well have idealised his homeland s recent past. The film shows what happened to this hopeful and bedraggled boy in the years that followed. “Iraq in Fragments� directed by James Longley, an American documentary film-maker, is undeniably beautiful. It is also harrowing. Earlier this year it took the Sundance film festival by storm, winning three top prizes, and by August it will have been shown at dozens more festivals. It is one of several remark fuel dispenser able feature-length documentaries to have sprung forth from the efforts of intrepid film-makers who shot digital video, with great patience and bravery, in those fleeting months during which it was possible to follow ordinary Iraqis through their own country. Mr Longley stresses the important difference between doc fuel dispenser umentaries that are made by a film-maker on location, shooting his own footage and working out his subject as he shoots, and documentaries that are assembled through archival research. Thanks to the proliferation of affordable digital-video technology, the Iraqi war has generated an unprecedented amount of daily news footage. Documentaries will be assembled from this material for many years to come. But this summer, for the first time since the American-led invasion three years ago, a series of innovative documentaries of the other type take up the lives of Iraqis in cinéma vérité style. Last year two American-produced films, “Gunner Palace�and the excellent “Occupation Dreamland� treated the bewildering experience of American soldiers stumbling into the difficulties of the war s first year. They were shot by small “embedded�crews and excelled in conveying the confusion a